Software MAS-100 NT®

Firmware update V 1.7.18

The new instrument software is Win 10 compatible. For futher information please read the Service Information Letter SIL_3_2017.   

Do not upgrade to FW 1.7.18 if you are using Firmware V1.3 or older.
Load this version with the FUT firmware update tool down to your MAS-100 NT®.
(only compatible with PC-SW 1.6.31)

PC-Software V 1.6.31 for MAS-100 NT® / Ex 

  1. 1. Download the V 1.6.31 on your PC.
  2. 2. Install the programm on your PC.
  3. 3. If you have problems contact your IT department.
  4. 4. After installation connect the MAS-100 NT® to your PC with an USB cable.
  5. 5. Start the Software and the MAS-100 NT®.
  6. 6. A USB driver will be installed at first time use.

Firmware update V 1.6 new 27.11.2014

The new instrument software is Win 8 / 8.1 compatible. Please note that this only comes in effect when connecting to the C&C SW on the PC or downloading a later FW upgrade via a Windows 8 / 8.1 system. 

Do not upgrade to FW 1.6 if you are using Firmware V1.3 or older.
Load this version with the downloadtool down to your MAS-100 NT®.
(only compatible with PC-SW 1.5x)

Firmware Update Tool (FUT)

This software is used to update the firmware with the ending *.mas100fw. The old *.tim files still have to be updated with the Firmware donload tool V1300.

Please read the user Manual FUT before use.

Firmware download tool V1300

  1. 1. Copy this tool to your PC
  2. 2. Start the tool
  3. 3. Follow the instructions
Please read the SOP before any Upgrade!

Firmware update V 1.4 new 05.04.2011

The new instrument software is tailored to the new motor. Do not upgrade to FW 1.4 without upgrading the hardware too.
Load this version with the downloadtool down to your MAS-100 NT®.
(Setting Serial number after default values)
(only compatible with PC-SW 1.5x)

PC-Software V 1.5.1 for MAS-100 NT® / Ex with win8 drivers

  1. 1. Download the V 1.5.1 on your PC.
  2. 2. Install the programm on your PC.
  3. 3. If you have problems contact your IT department.
  4. 4. After installation connect the MAS-100 NT® to your PC with an USB cable.
  5. 5. Start the Software and the MAS-100 NT®.
  6. 6. A USB driver will be installed at first time use.

PC-Software V 1.4 for MAS-100 NT® / Ex new up-date

new : with increased possibilities for alert and alarm settings up to 500

Communication and CalibrationTerminal software

Important: This freeware only works if it is connected with a MAS-100 NT®.

If the Microsoft.Net Framework is not on your PC it will automatically be installed during the installation of this SW. This may take up to 20 minutes.
  1. 1. Load down the V 1.4on your PC.
  2. 2. Install the programm on your PC.
  3. 3. If you have problems contact your IT department.
  4. 4. After installation connect the MAS-100 NT® to your PC with an USB cable.
  5. 5. Start the Software and the MAS-100 NT®.
  6. 6. A USB driver will be installed at first time use.

Firmware update V 1.3 new 18.03.2009

Load this version with the downloadtool down to your MAS-100 NT®.
(Setting Serial number after default values)
(only compatible with PC-SW 1.3 and 1.4)