Software MAS-100 NT®

Firmware update V 1.4 new 05.04.2011

Load this version with the downloadtool down to your MAS-100 NT®.
(Setting Serial number after default values)
(only compatible with PC-SW 1.5x)

PC-Freeware V 1.51 for MAS-100 NT® / Ex new up-date

1. 1. Download the V 1.51 on your PC.
2. 2. Install the programm on your PC.
3. 3. If you have problems contact your IT department.
4. 4. After installation connect the MAS-100 NT® to your PC with an USB cable.
5. 5. Start the Software and the MAS-100 NT®.
6. 6. A USB driver will be installed at first time use.

Service Information Letter 04_2009

New PC-Software release for MAS-100 NT®. major change is the increase of the Alert / Alarm /Limit value up to 500 CFU's

Service Information Letter 03_2009

Please find the list of the newest software up-dates of MAS-100 NT®.

PC-Freeware V 1.4 for MAS-100 NT® / Ex new up-date

new : with increased possibilities for alert and alarm settings up to 500

Communication and CalibrationTerminal software

Important: This freeware only works if it is connected with a MAS-100 NT®.

If the Microsoft.Net Framework is not on your PC it will automatically be installed during the installation of this SW. This may take up to 20 minutes.

1. 1. Load down the V 1.4on your PC.
2. 2. Install the programm on your PC.
3. 3. If you have problems contact your IT department.
4. 4. After installation connect the MAS-100 NT® to your PC with an USB cable.
5. 5. Start the Software and the MAS-100 NT®.
6. 6. A USB driver will be installed at first time use.

Firmware download tool V1210

1. 1. Copy this tool to your PC
2. 2. Start the tool
3. 3. Follow the instruction on the tool

Version 1210: only text changed to Version 1200.
During up-load of new FW , MAS-100 Iso NT® has not be turnd off and on again.

Firmware update V 1.3 new 18.03.2009

Load this version with the downloadtool down to your MAS-100 NT®.
(Setting Serial number after default values)
(only compatible with PC-SW 1.3 and 1.4)